CA Dealer Power Up Binder - Flipbook - Page 78
T y pe
Kr e s s Se r v ic e B u lle t i n
Bulletin#
KWB-2023-003
To
All Kress Dealers
Date:
05/ 1 7/ 23
Product
KA C8 7 5E
From
Steve Americano – Sr. Manager
After Market Sales & Support
Thank you for choosing Kress Commercial
Equipment and the CyberSystem. Kress will
continue to optimize the user experience by
updating the FirmWare on your CyberTank.
Please follow the below steps for over the air
updates (OTA)
OTA upgrade guide:
1. Find a location with good signal
strength, AC power source, and place
your CyberTank there. Turn the unit off.
2. Plug in the CyberTank. CyberTank
automatically powers on.
3. The CyberTank will automatically
update. The update process will take
approximately 30 minutes.
NOTE: Please be patient and do not turn off,
unplug or touch any buttons during the update
process.
Tips:
• While it shows “upgrade failure” interface (Fig. A), please check if the power is plugged in and the
circuit breaker is in the “ON” position (Fig. B); if the above two situations are normal, please keep
waiting for 1 minute, it will upgrade automatically again.
•
While it shows the emergency stop interface (Fig. C), please rotate the emergency stop button to
reset it. (refer to Fig. D). CyberTank will restart and upgrade automatically again.
•
While it is not plugged in, it will enter the interface “upgrade failure” (Fig. A), if this occurs,
please follow OTA upgrade above.
Dealer After Sales Technical Support
Tel: 855-85KRESS (855-825-7377)
